> Pole-24ft
Pole Height: Standard pole height is 26Ft. Optional heights are 13Ft, 20Ft,33Ft,40Ft. Custom heights are also available.
Material: Q235,Q355 is standard. Custom material can be also available just like Gr65, ASTMA572.
Hot dip galvanized: Standard requirement with ASTM123-17.
Surface Treatment: Powder Coating or Epoxy
Anchor Bolts: A set of 4 galvanized steel anchor bolts is provided with each pole assembly. Each anchor bolt includes 2 nuts and 2 washers. Base plate is available with galvanized or stainless steel.
Wind Force Calculation: Standard requirement 60KM/H, 90KM/H, 120KM/H and 160KM/H.
Warranty: 20 years
Foundation design: Foundation should be designed by an engineer familiar with local soil and wind conditions as well as local code where the pole(s) will be installed.
Pole Height: Standard pole height is 26Ft. Optional heights are 13Ft, 20Ft,33Ft,40Ft. Custom heights are also available.
Material: Q235,Q355 is standard. Custom material can be also available just like Gr65, ASTMA572.
Hot dip galvanized: Standard requirement with ASTM123-17.
Surface Treatment: Powder Coating or Epoxy
Anchor Bolts: A set of 4 galvanized steel anchor bolts is provided with each pole assembly. Each anchor bolt includes 2 nuts and 2 washers. Base plate is available with galvanized or stainless steel.
Wind Force Calculation: Standard requirement 60KM/H, 90KM/H, 120KM/H and 160KM/H.
Warranty: 20 years
Foundation design: Foundation should be designed by an engineer familiar with local soil and wind conditions as well as local code where the pole(s) will be installed.
Pole Height: Standard pole height is 26Ft. Optional heights are 13Ft, 20Ft,33Ft,40Ft. Custom heights are also available.
Material: Q235,Q355 is standard. Custom material can be also available just like Gr65, ASTMA572.
Hot dip galvanized: Standard requirement with ASTM123-17.
Surface Treatment: Powder Coating or Epoxy
Anchor Bolts: A set of 4 galvanized steel anchor bolts is provided with each pole assembly. Each anchor bolt includes 2 nuts and 2 washers. Base plate is available with galvanized or stainless steel.
Wind Force Calculation: Standard requirement 60KM/H, 90KM/H, 120KM/H and 160KM/H.
Warranty: 20 years
Foundation design: Foundation should be designed by an engineer familiar with local soil and wind conditions as well as local code where the pole(s) will be installed.
Watts measure power consumption, while lumens measure light output. Higher wattage doesn't always mean brighter light—lumens matter more for brightness.
It depends on the application. For example, small signs need around 3.4 watts, while large billboards may need up to 25 watts. Pathways usually need 15–25 watts, and parking lots or highways may require up to 70 watts.
Yes. Most LEDs range from 3000K to 5000K. Coastal areas may need turtle-friendly lighting, which impacts wattage and output.
These controls adjust brightness based on activity. They reduce power use during inactive times while maintaining safety and visibility.
They define how light spreads. Type II is ideal for paths and roads; Type III and IV suit parking lots and larger areas.
Always work with a solar lighting specialist. They’ll help ensure the fixture meets both lighting and solar power requirements efficiently.
